Romax Designer 14.5 WINDOWS 14.5 38 x86

[2013, ENG]
512.2 МБ 0 сидов / 0 личей

Romax Designer 14.5 WINDOWS
Год/Дата Выпуска: 2013
Версия: 14.5 Build 38
Разработчик: Romax Technology
Разрядность: 32bit
Язык интерфейса: Английский
Таблэтка: Присутствует (TeAM SolidSQUAD-SSQ)
Системные требования: Windows 32-bit or 64-bit
Описание: Пакет для расчет передач и трансмиссий для наземного транспорта и промышленных обьектов
RomaxDESIGNER is the product of choice for ground vehicle transmissions - from motorcycles to off-highway equipment - and is licensed by 14 of the world's top 15 automakers.
It is also used widely in the design of stationary products and industrial equipment including the world's largest wind turbine systems and is acknowledged as the industry standard for this rapidly expanding global market sector.
omaxDESIGNER is a virtual product development and simulation environment for the design, analysis & NVH exploration of the complete transmission - gearboxes, bearings, drivetrains and all components.
Reduce the development-analysis chain
RomaxDESIGNER can significantly reduce the number and length of design cycles by considering all system effects in just one transmission model. From the initial concept stages, component lives are calculated providing a fast and efficient method for system development.
RomaxDESIGNER can eliminate the need to switch between numerous software packages to calculate the different component reactions, greatly reducing time and cost involved in the design loop. Romax Designer Features Extremely fast solution times allow many more concepts or detailed designs compared to traditional procedures. In one package, RomaxDESIGNER offers:
Virtual product development tools
Gearbox concept design
Component sizing & selection
System deflections
Durability
Dynamics
NVH (Noise, Vibration, Harshness)
Efficiency
Design automation and optimisation
Sensitivity analysis
Optimisation processes
Efficiency predictions
Robust design tools
Design templates
Integration into the design process
Interfaces to CAD and CAE tools
Open data exchange with HTML and XML formats
Customisation and bespoke module development
System modelling capabilities
Build custom bearings or select from comprehensive OEM catalogues
Define custom connections between parts: in all 6 degrees of freedom
Integrate any type of gear
Define clutches, belts, chains, torque convertors, synchronisers and variable coupling ratios
Work with Finite Element components and condense using Romax FE Solver
Supports parallel, perpendicular and planetary systems
Model non-90 degree shaft arrangements
Define parameters for nearly all system attributes and connections
Component analysis capabilities
Complete component analysis
Calculate forces, stresses displacements and misalignment
Design and optimise gear macro- and micro-geometry
Customise bearings and other materials
Bearing pre-load tool for pre-load investigation
Dynamics and NVH
Analyse gear whine behaviour using the same model that you use for durability and rattle analysis
Confidently and accurately predict gear whine vibrations for manual and automatic transmissions at the design stage before expensive mistakes are made
Quickly and easily see the effect of design changes on NVH performance
Troubleshoot problems with existing designs and find solutions in a fraction of the time of traditional methods
Analyse vibration response and dynamic behaviour at component and full system level
Identify root causes of transmission noise via mode shape, modal energy, waterfall plots and harmonic response etc
Perform gear contact analysis for hypoid and bevel gears with interface to ANSol
Accurately account for misalignments and micro-geometry effects giving you accurate data to make design decisions
Optimisation and robustness studies
Perform system sensitivity analysis (DoE) and carry out optimisation experiments
Access all the parameters within the gearbox
Perform robustness studies and design for six sigma
Interfaces
Romax software is optimised to work with the whole design process. A range of interface options are available to enable your integration into your existing design environment. These enable smooth data hand-over to other software tools and provide co-simulation links.
FEA interfaces to Nastran, ANSYS, Abaqus, Hypermesh, I-DEAS and RADIOSS
LDP interface
ANSol interface
XML interface

Пожаловаться...
Содержание торрента
  • Romax.Designer.14.5.WINDOWS-SSQ
    • /autorun.inf

Свой комментарий